The distance for which signals have to traverse at a 45 corner of two 0.5 meter-thick walls reaches approximately 1 meter.

If the ambient temperature or relative humidity is overhigh or overlow, the device may be faulty.

Reserve a space of at least 10 cm above and around the device for heat dissipation.

During the installation, keep the device away from electric appliances that generate strong magnetic or electric fields, such as microwave ovens, refrigerators, and mobile phones.

Stop the device and switch off the power before connecting or disconnecting cables.

The socket-outlet shall be installed near the power adapter and shall be easily accessible.

Before use the power adapter, please check no damage on the adapter.

Do not install telephone lines, network cables, power adapters or power adapter cables outdoors.

Adopting these measures will help prevent device damage and bodily injuries which are especially prone during thunderstorms.

In the case of a device fault, contact the authorized service center.

Do not install GPON terminals in other modes, such as the ceiling.

The terminal cannot be connected to other devices such as GPON terminals, switch and router.

When connecting the backup battery unit, please see the usage guide to the backup battery for details.

Step 7: Press the WLAN switch to enable the Wi-Fi access function.

Step 8: Press the WPS switch to enable the WPS encryption function.

Echolife Hg8245Q Software In Advance

NOTE Before enabling the WPS encryption function of a GPON terminal, ensure that the function is set in the system software in advance.

After successful setting, press the WPS switch for the settings to take effect.

NOTE You can find the default management IP address on the nameplate of the device.

NOTE -If you do not perform any operations after logging in to the system for five minutes, you will exit the system and the system automatically returns to the login interface.

Echolife Hg8245Q Password Three Consecutive

The system will be locked if you input incorrect user name and password three consecutive times.

One minute later, it will be unlocked.

In the dialog box that is displayed, set the basic Wi-Fi parameters, including the SSID, authentication mode, and encryption mode.

SSID: See the nameplate on the device -WPA PreSharedKey: See the nameplate on the device SSID indicates the name of a wireless network searched by the Wi-Fi terminal; WPA PreSharedKey indicates the authentication password for the Wi-Fi terminal to access a wireless network.

The wireless network coverage of an ONT is affected by walls (number, thickness, position, and material), ceilings, and other objects that wireless signals need to traverse.

Besides, the material type and background radio frequency (RF) noise also affect the coverage of a wireless network.

You can maximize the coverage of a wireless network using the following methods.

Each wall or ceiling reduces the coverage diameter of a wireless network by 1 to 30 meters.

Place the ONT at a proper place where wireless signals need to traverse a minimum number of walls and ceilings.